حقائق رئيسية
- المواعيد
- 4–8 Jan 2027 (5 days)
- المكان
- ألماتي، كازاخستان
- الرسوم لكل مشارك
- £2,750 (جنيه إسترليني)
- الدفع
- بالفاتورة والتحويل المصرفي
- إغلاق التسجيل
- 5 ديسمبر 2026
- لمن هذا البرنامج
- District heating utility operations and maintenance engineers; Municipal energy and infrastructure department officers; Technical supervisors manag…
- الشهادة
- شهادة إتمام
- الخيار المؤسسي
- نفّذه لفريقك، في المواعيد التي تناسبك
في هذه الصفحة 13 قسماً
نظرة عامة على البرنامج
Municipal district heating infrastructure in cold-climate regions requires urgent technical modernisation to ensure operational resilience and reduce energy losses. This five-day executive programme in Almaty delivers practical instruction in network rehabilitation, advanced hydraulic balancing, and primary distribution optimisation. Participants examine state-of-the-art diagnostic procedures, pre-insulated piping specifications, and variable flow controls. The curriculum focuses on retrofitting legacy municipal networks to lower fuel consumption, improve circulation efficiency, and sustain supply temperatures during extreme winter conditions across urban centres.
Engineers and municipal officers will examine contemporary heat generation integration, booster pumping optimisation, and automated consumer substation retrofits. Through technical assessments and real-world case studies from Central Asian district heating grids, attendees learn to eliminate chronic pressure imbalances and network bottlenecks. The coursework directly reviews modern thermal insulation standards, non-destructive leak detection, and advanced scada telemetry. This approach enables utilities to shift from reactive network repairs to structured preventative asset maintenance.
The training thoroughly addresses consumer-end thermal management, including ultrasonic metering, building-level heat substations, and thermostatic regulation. Participants explore regulatory tariff structuring, water chemistry maintenance, and return-water temperature cooling techniques essential for distribution efficiency. By the conclusion of the course, attendees develop comprehensive operational loss-reduction frameworks and emergency cold-weather management plans, allowing them to apply capital investment resources effectively within major public infrastructure modernisations funded by international financial institutions.
Rapid urbanisation and severe winter conditions place unprecedented operational stress on centralised municipal heating utilities across cold-climate regions. Large-scale infrastructure undertakings, including the US$41m Ulaanbaatar Heating Sector Improvement Project, demand rigorous engineering competencies to replace deteriorating transmission mains, modernise consumer substations, and install automated metering. Addressing chronic network losses and uneven heat distribution requires utility supervisors and municipal officers to master advanced hydraulic management and pipe insulation standards immediately, ensuring reliable urban heating security and cost-efficient public investments.
Delivered by Risalat Consultants International in Almaty, Kazakhstan, it combines expert-led sessions, real cases and group work, so that participants can apply what they learn in their own institution.
The Programme Strengthens Institutional Capability
- Assessment of legacy central heating network topologies and thermal distribution bottlenecks
- Hydraulic calculation principles: Pressure profiles, flow velocity, and friction loss calculations
- Integration of variable-speed distribution pumps and secondary circulation optimisation
- Identification and rectification of network over-pumping and hydraulic short-circuiting
- Application of EN 13941 standards for district heating design and mechanical calculation
- Material selection: Polyurethane rigid foam insulation and high-density polyethylene casing
- Trenchless pipe replacement methodologies and civil excavation risk mitigation
- Surveillance wire integration, acoustic monitoring, and non-destructive leak detection
- التفكير الاستراتيجي وتحديد الاتجاه
- قيادة الفرق وتطويرها
- اتخاذ القرار وحل المشكلات
- التواصل والتأثير
It is designed for district heating utility operations and maintenance engineers, municipal energy and infrastructure department officers, technical supervisors managing central heating substations and others who want practical, current skills in leadership, management and communication.
The Growing Importance of District Heating Network Rehabilitation and Thermal Efficiency Management in Almaty
تتغير المؤسسات اليوم بوتيرة غير مسبوقة: سياسات وتقنيات جديدة وتوقعات متزايدة من المواطنين والشركاء. والقادة والمديرون القادرون على تحديد الاتجاه وبناء الفرق وإدارة التغيير هم من يصنعون الفرق بين الخطط والنتائج.
القيادة القوية مجموعة من المهارات العملية: اتخاذ القرار، والتواصل، والتفاوض، وتطوير الأفراد، وقيادة التغيير. ويمكن تعلّم هذه المهارات وتحسينها بالممارسة والتغذية الراجعة.
تحتاج المؤسسات بشكل متزايد إلى مهنيين قادرين على:
- حدّد اتجاهاً وأولويات واضحة
- قيادة الفرق وتحفيزها خلال التغيير
- التواصل والتفاوض بفعالية
- أدِر الأداء بإنصاف
- اتخذ قرارات سليمة تحت الضغط
تساعد الأنظمة القوية في القيادة والإدارة والتواصل المؤسسات على:
- حوّل الاستراتيجيات إلى نتائج
- ابنِ فرقاً متحفزة وقادرة
- أدِر التغيير بمقاومة أقل
- تحسين العلاقات مع الشركاء وأصحاب المصلحة
This District Heating Network Rehabilitation and Thermal Efficiency Management in Almaty programme brings these elements together in a practical format, so that participants understand not only what good practice looks like but also how to introduce it in their own setting, with the people and resources they have.
Who Should Attend This District Heating Network Rehabilitation and Thermal Efficiency Management in Almaty Training?
صُمم هذا البرنامج من أجل:
- District heating utility operations and maintenance engineers
- Municipal energy and infrastructure department officers
- Technical supervisors managing central heating substations
- Network design engineers responsible for pipeline retrofits
- Project implementation unit engineers on donor-funded heating projects
- Thermal power plant dispatchers and distribution managers
- Public works procurement specialists handling thermal utility assets
- Urban energy efficiency regulators and municipal utility inspectors
- المديرون وكبار المسؤولين
- رؤساء الإدارات والوحدات
- المديرون المتوسطون وقادة الفرق
- مديرو المشاريع والبرامج
يناسب البرنامج المهنيين ذوي الخبرة وكذلك من ينتقلون إلى مسؤوليات جديدة. ونشجع المجموعات التي تضم مؤسسات ودولاً مختلفة، لأن المشاركين يتعلمون الكثير من تجارب بعضهم بعضاً.
حدّد ما يحتاج فريقك إلى القدرة على إنجازه.
District Heating Network Rehabilitation and Thermal Efficiency Management in Almaty Training Objectives
Upon successful completion of this District Heating Network Rehabilitation and Thermal Efficiency Management in Almaty Training, participants will be able to:
- Evaluate network hydraulic performance to identify chronic pressure anomalies and circulation imbalances
- Specify modern pre-insulated piping materials and non-destructive leakage detection technologies according to international standards
- Formulate operational loss-reduction plans targeting thermal transmission and distribution inefficiencies
- Implement automated consumer-end substation controls and ultrasonic heat metering architectures
- Design hydraulic balancing protocols using variable-speed pumping and differential pressure control valves
- Develop temperature control and return-water cooling protocols for extreme sub-zero grid conditions
- Structure preventative maintenance and asset rehabilitation frameworks aligned with international financial institution standards
- شرح المناهج الحالية للقيادة في المؤسسات العامة والخاصة
- تحديد الاتجاه والأولويات لفرقهم
- قيادة الأفراد وتحفيزهم وتطويرهم
يُطبَّق كل هدف خلال البرنامج من خلال التمارين أو دراسات الحالة أو العمل الجماعي، بحيث يغادر المشاركون وهم قادرون على تنفيذه، لا على وصفه فحسب.
محتوى البرنامج وهيكله
- Assessment of legacy central heating network topologies and thermal distribution bottlenecks
- Hydraulic calculation principles: Pressure profiles, flow velocity, and friction loss calculations
- Integration of variable-speed distribution pumps and secondary circulation optimisation
- Identification and rectification of network over-pumping and hydraulic short-circuiting
- Application of EN 13941 standards for district heating design and mechanical calculation
- Material selection: Polyurethane rigid foam insulation and high-density polyethylene casing
- Trenchless pipe replacement methodologies and civil excavation risk mitigation
- Surveillance wire integration, acoustic monitoring, and non-destructive leak detection
- Corrosion management, thermal expansion loop design, and pre-stressed piping installation
- Field inspection protocols for supply and return piping compliance with EN 253
- Transitioning from direct-connection open systems to indirect automated substations
- Plate heat exchanger sizing, maintenance, and thermal fouling mitigation strategies
- Differential pressure control valves and automated temperature control actuators
- Return-water temperature limitation techniques to maximise network thermal capacity
- Building-level thermostatic regulation and space-heating balancing procedures
- Commercial and technical ultrasonic heat metering according to EN 1434 standards
- Automated Meter Reading (AMR) and Advanced Metering Infrastructure (AMI) architecture
- Integration of network Supervisory Control and Data Acquisition (SCADA) telemetry systems
- Data validation, remote temperature monitoring, and baseline loss identification
- Tariff boundary metering, billing transparency, and unaccounted-for heat audits
- Water treatment, de-aeration, and make-up water quality control for grid longevity
- Drafting municipal operational loss-reduction plans for multi-season implementation
- Cold-weather emergency management: Mitigating freezing risks during network outages
- Capital investment prioritisation frameworks for international donor-financed projects
- Final presentation and appraisal of participant network rehabilitation plans
المحتوى الكامل يوماً بيوم
يمتد البرنامج على 5 أيام. ويجمع كل يوم بين مداخلات الخبراء والعمل التطبيقي وورشة عمل أو دراسة حالة ختامية:
- First Day: Hydraulic Dynamics and Network Assessment in Legacy Systems
- Second Day: Pipeline Rehabilitation, Insulation, and Leak Detection
- Third Day: Consumer Substations and Building-Level Thermal Modernisation
- Fourth Day: Advanced Metering Infrastructure and Network Digitalisation
- Fifth Day: Thermal Loss Reduction Strategies and Cold-Climate Operations
المحتوى الكامل يوماً بيوم
First Day | Hydraulic Dynamics and Network Assessment in Legacy Systems
- Assessment of legacy central heating network topologies and thermal distribution bottlenecks
- Hydraulic calculation principles: Pressure profiles, flow velocity, and friction loss calculations
- Integration of variable-speed distribution pumps and secondary circulation optimisation
- Identification and rectification of network over-pumping and hydraulic short-circuiting
- Application of EN 13941 standards for district heating design and mechanical calculation
Workshop: Hydraulic Dynamics and Network Assessment in Legacy Systems: Applying It to Your Institution
يعمل المشاركون في مجموعات صغيرة على تطبيق أساليب اليوم على أمثلة من مؤسساتهم، ويتفقون على خطوات عملية تالية.
Second Day | Pipeline Rehabilitation, Insulation, and Leak Detection
- Material selection: Polyurethane rigid foam insulation and high-density polyethylene casing
- Trenchless pipe replacement methodologies and civil excavation risk mitigation
- Surveillance wire integration, acoustic monitoring, and non-destructive leak detection
- Corrosion management, thermal expansion loop design, and pre-stressed piping installation
- Field inspection protocols for supply and return piping compliance with EN 253
Workshop: Pipeline Rehabilitation, Insulation, and Leak Detection: Applying It to Your Institution
يعمل المشاركون في مجموعات صغيرة على تطبيق أساليب اليوم على أمثلة من مؤسساتهم، ويتفقون على خطوات عملية تالية.
Third Day | Consumer Substations and Building-Level Thermal Modernisation
- Transitioning from direct-connection open systems to indirect automated substations
- Plate heat exchanger sizing, maintenance, and thermal fouling mitigation strategies
- Differential pressure control valves and automated temperature control actuators
- Return-water temperature limitation techniques to maximise network thermal capacity
- Building-level thermostatic regulation and space-heating balancing procedures
Case Study: Consumer Substations and Building-Level Thermal Modernisation in Practice
يحلل المشاركون حالة واقعية، ويقارنون الخيارات المتخذة بالممارسات الجيدة، ويستخلصون دروساً يمكنهم تطبيقها في بيئة عملهم.
Fourth Day | Advanced Metering Infrastructure and Network Digitalisation
- Commercial and technical ultrasonic heat metering according to EN 1434 standards
- Automated Meter Reading (AMR) and Advanced Metering Infrastructure (AMI) architecture
- Integration of network Supervisory Control and Data Acquisition (SCADA) telemetry systems
- Data validation, remote temperature monitoring, and baseline loss identification
- Tariff boundary metering, billing transparency, and unaccounted-for heat audits
Workshop: Advanced Metering Infrastructure and Network Digitalisation: Applying It to Your Institution
يعمل المشاركون في مجموعات صغيرة على تطبيق أساليب اليوم على أمثلة من مؤسساتهم، ويتفقون على خطوات عملية تالية.
Fifth Day | Thermal Loss Reduction Strategies and Cold-Climate Operations
- Water treatment, de-aeration, and make-up water quality control for grid longevity
- Drafting municipal operational loss-reduction plans for multi-season implementation
- Cold-weather emergency management: Mitigating freezing risks during network outages
- Capital investment prioritisation frameworks for international donor-financed projects
- Final presentation and appraisal of participant network rehabilitation plans
Capstone Exercise: District Heating Network Rehabilitation and Thermal Efficiency Management in Almaty Action Plan for Your Institution
يجمع المشاركون حصيلة الأسبوع في خطة عمل لمؤسساتهم، تتضمن الأولويات والمسؤولين والخطوات الأولى، ثم يعرضونها لتلقي ملاحظات الزملاء والميسّرين.
District Heating Network Rehabilitation and Thermal Efficiency Management in Almaty Training Methodology
The programme employs practical engineering workshops, interactive technical simulations, and guided analysis of municipal network schematics. Participants examine operational datasets, review pipe specification sheets, and carry out hydraulic calculations using industry-standard formulas. Technical discussions are reinforced through structured group drafting exercises, allowing utility engineers to apply rehabilitation concepts directly to the challenges of their domestic heating networks.
يجمع البرنامج بين:
- جلسات يقودها خبراء حول الممارسات الحالية
- دراسات حالة إقليمية ودولية
- عمل جماعي وتمارين عملية
- محاكاة ولعب أدوار حسب الحاجة
- مناقشة التحديات الخاصة بالمشاركين
- التعلم من الأقران عبر المؤسسات والدول
- أدوات ونماذج عملية تعود بها إلى العمل
- تأمل يومي وتخطيط للعمل
قبل البرنامج، يساعد تقييم مسبق قصير الميسّرين على فهم دور كل مشارك وأولوياته، بحيث يمكن تكييف الأمثلة والتمارين مع المجموعة. ويُختتم كل يوم بتأمل قصير يدوّن فيه المشاركون ما سيطبقونه في العمل.
- الصناديق
- الجهة
- المشروع
- النتائج
- القياس والإبلاغ والتحقق
النتائج المتوقعة
Upon completion of this District Heating Network Rehabilitation and Thermal Efficiency Management in Almaty Training, participants will be able to:
- Demonstrated ability to detect and rectify network hydraulic imbalances using specialised balancing valves
- Practical skill in drafting compliant specifications for pre-insulated pipes under EN standards
- Detailed technical plans for modernising consumer substations from direct to indirect configurations
- Complete operational strategies for reducing primary distribution losses and controlling return temperatures
- Proficiency in specifying and deploying ultrasonic thermal energy metering infrastructures
- Comprehensive cold-weather operational contingency protocols for severe sub-zero grid emergencies
- حدّد اتجاهاً وأولويات واضحة
- قيادة الفرق وتطويرها
يغادر المشاركون بخطة عمل شخصية وأدوات عملية يمكنهم استخدامها في مؤسساتهم منذ الأسبوع الأول من عودتهم. ويمكن للمؤسسات التي ترسل عدة مشاركين الاستفادة من البرنامج للاتفاق على أساليب ونماذج مشتركة بين الفرق، مما يسهّل استدامة التحسينات.
£2,750 لكل مشارك · فاتورة وتحويل مصرفي · خصم للمجموعات المكوّنة من 5 مشاركين أو أكثر
خمسة مشاركين أو أكثر من مؤسسة واحدة: اطلبوا سعر المجموعة عند طلب الفاتورة.
عشرة مشاركين أو أكثر: قد تكون تكلفة النسخة الداخلية لمؤسستك أقل للفرد الواحد. اطلب عرض سعر للتدريب الداخلي.
Registration closes in 23 days (5 Dec 2026)
Institutional Application of District Heating Network Rehabilitation and Thermal Efficiency Management in Almaty Training
يدعم هذا البرنامج المؤسسات في تعزيز:
- القيادة والإدارة
- تطوير الفرق
- إدارة التغيير
- التواصل
- إدارة الأداء
يعود المشاركون بأدوات عملية لتحسين:
- خطط الفرق
- التوجيه والإرشاد
- خطط التغيير
- التواصل مع أصحاب المصلحة
- مراجعات الأداء
صُمم البرنامج بحيث ينتقل التعلم من قاعة التدريب إلى المؤسسة. ويعمل المشاركون على عملياتهم ووثائقهم الخاصة كلما أمكن، ويغادرون بخطة عمل يمكن لمديريهم مراجعتها ودعمها.
الأهمية الإقليمية والتطبيق
أوروبا
تطبّق المؤسسات الأوروبية القيادة والإدارة والتواصل ضمن أطر تنظيمية مفصّلة وأجندات إصلاحية. ويمكن للمشاركين من أوروبا مقارنة ممارساتهم بممارسات زملائهم من مناطق أخرى، واختبار مدى نجاح الأساليب الراسخة في ظروف مختلفة.
أفريقيا
في أنحاء أفريقيا، تعمل الوزارات والهيئات وفرق المشاريع العاملة في مجالات القيادة والإدارة والتواصل بشكل متزايد إلى جانب برامج ممولة من الجهات المانحة تتطلب أنظمة وأدلة واضحة. ويساعد البرنامج المشاركين على تكييف الممارسات الجيدة مع المؤسسات والموارد التي يعملون بها.
الشرق الأوسط
في الشرق الأوسط، تفرض استراتيجيات التنمية الوطنية وخطط التنويع متطلبات متزايدة على القيادة والإدارة والتواصل. ويستكشف المشاركون كيفية بناء القدرات التي تحتاجها هذه الخطط داخل الجهات العامة والشركات.
آسيا
تجمع المؤسسات في أنحاء آسيا بين النمو السريع وبرامج التحديث الطموحة. ويمكن للمشاركين من آسيا تبادل خبراتهم في التوسع السريع في الأنظمة والتعلم من المناهج المتبعة في أماكن أخرى.
المحيط الهادئ
تواجه الدول الجزرية الصغيرة ودول المحيط الهادئ قيوداً خاصة تتعلق بالحجم والمسافة والقدرات. ويسلط البرنامج الضوء على مناهج عملية ومتناسبة في القيادة والإدارة والتواصل تلائم المؤسسات الأصغر حجماً.
Holding the programme in Almaty, Kazakhstan brings participants together away from their daily pressures, so they can compare how leadership, management and communication is handled in different settings. The same programme can also be delivered in-house for one institution, in its own country or online, with cases taken from its current work.
لمحة عن البلد المضيف – كازاخستان
برامج وورش عمل وزيارات ميدانية ودورات تدريبية في ألماتي، كازاخستان من Risalat Consultants International
تمنح الدراسة خارج البلد الأصلي المشاركين وقتاً للتركيز، ونظرة جديدة إلى مؤسساتهم، وفرصة لبناء شبكة علاقات مع زملاء من دول أخرى.
District Heating Network Rehabilitation and Thermal Efficiency Management in Almaty Training Deliverables
يحصل المشاركون على الدعم قبل البرنامج وأثناءه وبعده، بحيث يشكّل التحضير والتعلم والمتابعة تجربة واحدة متصلة.
قبل البرنامج
- التقييم المسبق للمشاركين
- District Heating Network Rehabilitation and Thermal Efficiency Management in Almaty Readiness Assessment
- District Heating Network Rehabilitation and Thermal Efficiency Management in Almaty Resource Pack
- مواد قراءة تحضيرية
- دعم واستشارات مجانية بشأن التأشيرة
أثناء البرنامج
- الاستقبال من المطار والمساعدة عند الوصول
- إقامة مع الإفطار
- عشاء ترحيبي للتعارف
- حقيبة Risalat التدريبية (حقيبة، وقارورة، وكوب، وقميص، وقبعة، وغلاف جواز سفر، وأقلام، ودفتر، ومغناطيس وميدالية مفاتيح)
- Comprehensive District Heating Network Rehabilitation and Thermal Efficiency Management in Almaty Training Manual
- التقييم الذاتي للقيادة
- نموذج خطة تطوير الفريق
- نموذج خطة التغيير
- ورقة التحضير للتفاوض
- ورش عمل عملية ومحاكاة
- مناقشات جماعية وتعلم من الأقران
- غداء ومرطبات يومية
- الاستفادة الكاملة من مرافق مكان التدريب
- جهاز Mini Pad / جهاز لوحي مزود بمواد تعليمية رقمية
- زيارة ميدانية (حسب الاقتضاء)
- جولة ترفيهية في المدينة
بعد البرنامج
- شهادة الإتمام
- جائزة Risalat تقديراً للمشاركة في البرنامج
- مواد مرجعية بعد التدريب
- نموذج خطة التطوير الشخصي
- دليل محادثات التوجيه
- الدعم بعد التدريب وإرشادات المتابعة
- تقرير البرنامج
يمكن للمؤسسات أيضاً طلب نسخة داخلية مصممة خصيصاً من هذا البرنامج، تُقدَّم في مقارها أو عبر الإنترنت. اطلب عرضاً.
Common Challenges in District Heating Network Rehabilitation and Thermal Efficiency Management in Almaty, And How This Training Helps
كيف يمكن للمؤسسات تحديد اتجاه وأولويات واضحة؟
The programme addresses this directly on the first day (Hydraulic Dynamics and Network Assessment in Legacy Systems), where participants practise the methods involved and adapt them to their own institution, then build it into their action plan.
كيف يمكن للمؤسسات قيادة الفرق وتحفيزها خلال التغيير؟
The programme addresses this directly on the second day (Pipeline Rehabilitation, Insulation, and Leak Detection), where participants practise the methods involved and adapt them to their own institution, then build it into their action plan.
كيف يمكن للمؤسسات التواصل والتفاوض بفعالية؟
The programme addresses this directly on the third day (Consumer Substations and Building-Level Thermal Modernisation), where participants practise the methods involved and adapt them to their own institution, then build it into their action plan.
كيف يمكن للمؤسسات إدارة الأداء بإنصاف؟
The programme addresses this directly on the fourth day (Advanced Metering Infrastructure and Network Digitalisation), where participants practise the methods involved and adapt them to their own institution, then build it into their action plan.
كيف يمكن للمؤسسات اتخاذ قرارات سليمة تحت الضغط؟
The programme addresses this directly on the fifth day (Thermal Loss Reduction Strategies and Cold-Climate Operations), where participants practise the methods involved and adapt them to their own institution, then build it into their action plan.
الأسئلة الشائعة
When and where does the District Heating Network Rehabilitation and Thermal Efficiency Management in Almaty programme take place?
It runs from 4 Jan 2027 to 8 Jan 2027, in Almaty, Kazakhstan. The registration deadline is shown at the top of this page.
من ينبغي أن يحضر؟
The programme is designed for district heating utility operations and maintenance engineers, municipal energy and infrastructure department officers, technical supervisors managing central heating substations, network design engineers responsible for pipeline retrofits, and others who want practical skills in leadership, management and communication.
هل سأحصل على شهادة؟
نعم. يحصل المشاركون الذين يُتمّون البرنامج على شهادة إتمام من Risalat Consultants International.
هل يمكن تقديم هذا البرنامج لمؤسستنا حصرياً؟
نعم. يمكننا تقديم نسخة مؤسسية مصممة خصيصاً في مقر مؤسستكم أو في مدينة أخرى أو عبر الإنترنت، مبنية حول حالاتكم الخاصة. استخدموا نموذج طلب العرض في هذه الصفحة.
هل أحتاج إلى خبرة سابقة في القيادة والإدارة والتواصل؟
لا يُشترط أي تخصص سوى الخبرة في دور ذي صلة. ويساعد تقييم مسبق قصير الميسّرين على تكييف الجلسات مع المجموعة.
Who Will Deliver This Programme
Each date is delivered by a team assigned from Risalat's expert network for this subject. For this programme we assign:
How we choose them: Experience in the region of the participants or comparable settings; Command of the financier rules that apply (World Bank, ADB, AfDB, EU, UN) where relevant; Delivery in English; other languages on request for in-house groups; No conflict of interest with participants' institutions.
Names and short CVs of the assigned experts are shared with registered participants and sponsoring organisations before the programme, on request. Are you an expert in this subject? Join our expert network.
Training courses in AlmatyEnergy and Water training courses
لماذا ألماتي لهذا البرنامج
تُعدّ ألماتي مركزاً مناسباً لوفود آسيا الوسطى، مع أماكن انعقاد جيدة وقيمة مجزية.
The District Heating Network Rehabilitation and Thermal Efficiency Management in Almaty programme in January 2027 brings together officials and professionals from across the Central Asia region and beyond. Sessions combine short inputs, case studies and group work on participants' own files, and the city's institutions can be added as a study visit on request.
الوصول: مطار ألماتي الدولي (ALA).
تحقق مما إذا كنت بحاجة إلى تأشيرة عبر أداة التحقق من التأشيرة المجانية، واطلب خطاب دعوة بعد إتمام تسجيلك.
الموضوع نفسه في مدن أخرى
- Urban Clean Heating and District Energy Decarbonisation in Vienna (Vienna)
- District Heating Modernisation and Municipal Energy Efficiency in Almaty (Almaty)
برامج أخرى في ألماتي
- Resilient School Construction and Seismic Retrofitting Supervision in Almaty
- Preschool Physical Infrastructure and Early Child Nutrition Systems in Almaty
- Power Transmission Asset Reliability and SCADA Modernisation in Almaty
- Apprenticeship Systems and Work-Based Learning Frameworks in Almaty
- TVET Curriculum Development and Industry Alignment in Almaty
For teams and institutions
Bring your team
Teams that learn together apply more at work. Tell us how many people and how you would like to take part: we reply with a group quote within two working days.
المزيد من الدورات التدريبية في كازاخستان · جميع البرامج في آسيا · تقويم التدريب الكامل
Plan this programme in a roadmap: why it matters, why to approve it, the dates to plan and the career it builds.



