Key facts
- Dates
- 18–22 Jan 2027 (5 days)
- Where
- Istanbul, Turkey
- Fee per participant
- £3,050 (GBP)
- Payment
- By invoice and bank transfer
- Registration closes
- 19 Dec 2026
- Certificate
- Certificate of completion
- In-house option
- Run it for your team, on your dates
On this page 12 sections
Programme Overview
Large-scale urban water transmission systems demand robust engineering oversight and operational management to maintain network integrity under variable demand. This five-day executive programme in Istanbul provides municipal water professionals with technical knowledge across bulk water conveyance lines, pressurised water transmission tunnels, and metropolitan distribution schemes. Participants examine the intersection of structural monitoring, flow optimisation, and dynamic hydraulic regimes within complex municipal supply boundaries, aligning operational procedures with established engineering practices.
Through technical lectures and structured analysis, the course addresses transient pressure control, water quality supervision, and preventive maintenance strategies across bulk networks. Istanbul provides an instructive reference environment featuring high-capacity gravity and pumped water tunnels, complex bulk transfer interfaces, and advanced supervisory systems. Technical personnel evaluate operating frameworks that safeguard infrastructure assets, minimise conveyance losses, and secure steady water delivery to metropolitan populations facing operational disruptions and structural constraints.
The curriculum supports engineers and technical managers tasked with operating capital-intensive conveyance schemes delivered through international development financing. Participants examine supervisory control protocols, pipeline condition assessment, and asset management principles consistent with recognised international water industry practices. By linking hydraulic theory to practical system supervision, the training strengthens institutional capability to commission, operate, and maintain strategic conveyance infrastructure over its design life cycle.
Metropolitan utilities require heightened engineering and operational readiness to commission and manage major capital schemes, such as the US$290m Greater Beirut water supply investments. Capital investments in deep rock tunnels, treatment interfaces, and bulk transmission pipelines only yield long-term service improvements when local technical cadres master transient pressure control, online water quality monitoring, and proactive asset integrity management.
Delivered by Risalat Consultants International in Istanbul, Turkey, it combines expert-led sessions, real cases and group work, so that participants can apply what they learn in their own institution.
The Programme Strengthens Institutional Capability
- Hydraulics of pressurised deep rock tunnels and lined transmission conduits
- Hydraulic surge analysis, water hammer mitigation, and surge protection facilities
- Bulk transmission pipeline materials, joints, and external protection standards
- Intake works, shaft designs, and control valve interfaces in gravity and pumped systems
- Review of hydraulic performance standards under American Water Works Association (AWWA) guidelines
- Instrumentation for large-diameter bulk pipelines: electromagnetic, ultrasonic, and differential flow meters
- SCADA system architectures, remote telemetry units (RTUs), and data integration protocols
- Pressure management regimes and boundary monitoring across supply zones
- Climate and environmental risk assessment
- Adaptation and mitigation planning
- Sector strategies for energy, water and land
- Project design for climate and environmental goals
It is designed for technical directors and utility executives from Beirut Mount Lebanon Water Establishment, project Implementation Unit (PIU) engineers managing bulk water investments, water network operations managers overseeing municipal transmission mains and others who want practical, current skills in climate, environment and natural resources.
The Growing Importance of Urban Water Transmission Tunnels & Bulk Water Network Operations in Istanbul
Climate change, environmental pressure and resource management now shape national plans, budgets and investment decisions. Financiers increasingly expect climate and environmental considerations to be built into projects from the start.
Institutions that can plan for climate risks, manage natural resources well and prepare sound proposals are better placed to protect services and to access the funding available for this work.
Organisations increasingly require professionals capable of:
- Assess climate and environmental risks to their services and assets
- Design projects that meet climate and environmental goals
- Prepare proposals that financiers can approve
- Measure and report results credibly
- Work with communities and partners across sectors
Strong climate, environment and natural resources systems help organisations:
- Protect services and infrastructure from climate risks
- Access climate and environmental finance
- Meet national and international commitments
- Use natural resources sustainably
This Urban Water Transmission Tunnels & Bulk Water Network Operations in Istanbul programme brings these elements together in a practical format, so that participants understand not only what good practice looks like but also how to introduce it in their own setting, with the people and resources they have.
Who Should Attend This Urban Water Transmission Tunnels & Bulk Water Network Operations in Istanbul Training?
This programme is designed for:
- Technical directors and utility executives from Beirut Mount Lebanon Water Establishment
- Project Implementation Unit (PIU) engineers managing bulk water investments
- Water network operations managers overseeing municipal transmission mains
- Hydraulic engineers and network modellers from municipal water establishments
- Supervisory Control and Data Acquisition (SCADA) telemetry engineers and technicians
- Operations and maintenance engineers responsible for deep tunnels and pump stations
- Quality assurance and water testing laboratory managers in bulk supply systems
- Technical procurement and contract management specialists for water works
- Asset management and pipeline integrity monitoring personnel
- Climate change and environment officers
- Energy, water and agriculture sector staff
- Planning and policy officers
The programme suits experienced professionals as well as those moving into new responsibilities. Groups that mix institutions and countries are encouraged, because participants learn a great deal from each other’s experience.
Tick what your team needs to be able to do.
Urban Water Transmission Tunnels & Bulk Water Network Operations in Istanbul Training Objectives
Upon successful completion of this Urban Water Transmission Tunnels & Bulk Water Network Operations in Istanbul Training, participants will be able to:
- Analyse hydraulic behaviour and transient flow dynamics in pressurised rock-bored and lined transmission tunnels
- Evaluate telemetry architectures, instrumentation protocols, and SCADA monitoring across regional bulk distribution networks
- Develop operational regimes for pressure reduction, surge control, and non-revenue water mitigation in trunk mains
- Design continuous water quality monitoring protocols across bulk conveyance and distribution interfaces
- Formulate preventive maintenance schedules and pipeline integrity inspection regimes using international condition assessment standards
- Establish emergency response, isolation, and unwatering procedures for major conveyance tunnels and transmission conduits
- Apply asset lifecycle management principles to optimise operational expenditure and capital renewal in bulk water infrastructure
- Explain the main climate and environmental challenges for their sector
- Assess climate and environmental risks to services and assets
- Plan adaptation and mitigation measures
Each objective is practised during the programme through exercises, cases or group work, so that participants leave able to do it, not only to describe it.
Programme Contents and Structure
- Hydraulics of pressurised deep rock tunnels and lined transmission conduits
- Hydraulic surge analysis, water hammer mitigation, and surge protection facilities
- Bulk transmission pipeline materials, joints, and external protection standards
- Intake works, shaft designs, and control valve interfaces in gravity and pumped systems
- Review of hydraulic performance standards under American Water Works Association (AWWA) guidelines
- Instrumentation for large-diameter bulk pipelines: electromagnetic, ultrasonic, and differential flow meters
- SCADA system architectures, remote telemetry units (RTUs), and data integration protocols
- Pressure management regimes and boundary monitoring across supply zones
- Online water quality telemetry: turbidity, residual chlorine, pH, and conductivity tracking
- Data verification methods and diagnostic alert management in central control facilities
- Water quality dynamics during bulk transit through long-distance tunnel conduits
- Disinfection residual maintenance and re-chlorination strategies in bulk networks
- Biofilm development, sediment accumulation, and flushing procedures in raw and treated water mains
- Sampling regimes and compliance verification under World Health Organisation guidelines for drinking water quality
- Risk-based water safety planning across the bulk extraction-transmission interface
- Non-destructive testing and acoustic inspection methods for large-diameter pipes and tunnel linings
- Unwatering protocols, geotechnical safety, and confined space entry during tunnel shutdowns
- Corrosion monitoring, cathodic protection management, and structural defect mapping
- Transient pressure event recording and structural fatigue tracking on trunk assets
- Standardized asset grading and defect classification following international utility protocols
- Reliability-centred maintenance strategies for large isolation valves, actuators, and air release valves
- Emergency response protocols for major pipeline ruptures, structural failures, and contamination ingress
- Isolation sectorisation, operational bypass switching, and network resilience management
- Capital replacement planning and integration of condition data into utility asset registries
- Synthesis workshop: operational readiness and commissioning checklist for strategic bulk transfer schemes
Full day-by-day contents
The programme runs over 5 days. Each day combines expert input, practical work and a closing workshop or case study:
- First Day: Tunnel Hydraulics and Bulk Water Conveyance Design
- Second Day: Telemetry, Flow Monitoring, and Bulk Water SCADA Systems
- Third Day: Water Quality Supervision and Transmission Integrity
- Fourth Day: Structural Condition Assessment and Asset Inspection Protocols
- Fifth Day: Preventive Maintenance Planning and Operational Contingencies
Full day-by-day contents
First Day | Tunnel Hydraulics and Bulk Water Conveyance Design
- Hydraulics of pressurised deep rock tunnels and lined transmission conduits
- Hydraulic surge analysis, water hammer mitigation, and surge protection facilities
- Bulk transmission pipeline materials, joints, and external protection standards
- Intake works, shaft designs, and control valve interfaces in gravity and pumped systems
- Review of hydraulic performance standards under American Water Works Association (AWWA) guidelines
Workshop: Tunnel Hydraulics and Bulk Water Conveyance Design: Applying It to Your Institution
Working in small groups, participants apply the day's methods to examples from their own institutions and agree practical next steps.
Second Day | Telemetry, Flow Monitoring, and Bulk Water SCADA Systems
- Instrumentation for large-diameter bulk pipelines: electromagnetic, ultrasonic, and differential flow meters
- SCADA system architectures, remote telemetry units (RTUs), and data integration protocols
- Pressure management regimes and boundary monitoring across supply zones
- Online water quality telemetry: turbidity, residual chlorine, pH, and conductivity tracking
- Data verification methods and diagnostic alert management in central control facilities
Workshop: Telemetry, Flow Monitoring, and Bulk Water SCADA Systems: Applying It to Your Institution
Working in small groups, participants apply the day's methods to examples from their own institutions and agree practical next steps.
Third Day | Water Quality Supervision and Transmission Integrity
- Water quality dynamics during bulk transit through long-distance tunnel conduits
- Disinfection residual maintenance and re-chlorination strategies in bulk networks
- Biofilm development, sediment accumulation, and flushing procedures in raw and treated water mains
- Sampling regimes and compliance verification under World Health Organisation guidelines for drinking water quality
- Risk-based water safety planning across the bulk extraction-transmission interface
Case Study: Water Quality Supervision and Transmission Integrity in Practice
Participants analyse a realistic case, compare the choices made with good practice and draw lessons they can use in their own setting.
Fourth Day | Structural Condition Assessment and Asset Inspection Protocols
- Non-destructive testing and acoustic inspection methods for large-diameter pipes and tunnel linings
- Unwatering protocols, geotechnical safety, and confined space entry during tunnel shutdowns
- Corrosion monitoring, cathodic protection management, and structural defect mapping
- Transient pressure event recording and structural fatigue tracking on trunk assets
- Standardized asset grading and defect classification following international utility protocols
Workshop: Structural Condition Assessment and Asset Inspection Protocols: Applying It to Your Institution
Working in small groups, participants apply the day's methods to examples from their own institutions and agree practical next steps.
Fifth Day | Preventive Maintenance Planning and Operational Contingencies
- Reliability-centred maintenance strategies for large isolation valves, actuators, and air release valves
- Emergency response protocols for major pipeline ruptures, structural failures, and contamination ingress
- Isolation sectorisation, operational bypass switching, and network resilience management
- Capital replacement planning and integration of condition data into utility asset registries
- Synthesis workshop: operational readiness and commissioning checklist for strategic bulk transfer schemes
Capstone Exercise: Urban Water Transmission Tunnels & Bulk Water Network Operations in Istanbul Action Plan for Your Institution
Participants bring the week together in an action plan for their own institution, with priorities, owners and first steps, and present it for feedback from peers and facilitators.
- Funds
- Entity
- Project
- Results
- MRV
Urban Water Transmission Tunnels & Bulk Water Network Operations in Istanbul Training Methodology
The training employs a participatory technical approach combining engineering lectures, diagnostic problem-solving exercises, and utility case studies from Istanbul bulk water operations. Participants review hydraulic data, interpret SCADA event logs, evaluate pipeline failure scenarios, and complete structured operational planning workshops directly relevant to metropolitan transmission networks.
The programme combines:
- Expert-led sessions on current practice
- Regional and international case studies
- Group work and practical exercises
- Simulations and role plays where relevant
- Discussion of participants' own challenges
- Peer learning across institutions and countries
- Practical tools and templates to take back to work
- Daily reflection and action planning
Before the programme, a short pre-assessment helps the facilitators understand each participant’s role and priorities, so that examples and exercises can be adjusted to the group. Each day ends with a short reflection in which participants note what they will apply at work.
Expected Outcomes
Upon completion of this Urban Water Transmission Tunnels & Bulk Water Network Operations in Istanbul Training, participants will be able to:
- Ability to diagnose and mitigate hydraulic transients, surge events, and pressure deviations in bulk transfer tunnels
- Competence in configuring SCADA telemetry and flow monitoring parameters for regional water balance tracking
- Practical skill in designing preventive maintenance schedules and unwatering workflows for large conduits
- Capability to supervise real-time water quality parameters across long transmission distances to maintain compliance
- Proficiency in developing non-revenue water mitigation and leak detection strategies for trunk conveyance pipelines
- Preparedness to manage operational commissioning, emergency shutdowns, and maintenance protocols on donor-financed schemes
- Assess climate and environmental risks
- Plan adaptation and mitigation measures
Participants leave with a personal action plan and practical tools they can use in their institution from the first week back. Institutions that send several participants can use the programme to agree shared methods and templates across teams, which makes improvements easier to sustain.
£3,050 per participant · invoice and bank transfer · groups of 5 or more receive a discount
Five or more from one organisation: ask for the group rate on the invoice request.
Ten or more: an in-house version for your institution may cost less per person. Ask for an in-house quote.
Registration closes in 41 days (19 Dec 2026)
Institutional Application of Urban Water Transmission Tunnels & Bulk Water Network Operations in Istanbul Training
This programme supports organisations in strengthening:
- Climate and environmental planning
- Project design
- Access to finance
- Results measurement
- Stakeholder involvement
Participants return with practical tools to improve:
- Risk assessments
- Concept notes
- Results frameworks
- Monitoring systems
- Partnership arrangements
The programme is built so that learning moves from the classroom into the institution. Participants work on their own processes and documents where possible, and leave with an action plan that their managers can review and support.
Regional Relevance & Application
Europe
European institutions apply climate, environment and natural resources within detailed regulatory frameworks and reform agendas. Participants from Europe can compare their practice with colleagues from other regions and test how established methods work under different conditions.
Africa
Across Africa, ministries, agencies and project teams working in climate, environment and natural resources increasingly operate alongside donor-financed programmes that expect clear systems and evidence. The programme helps participants adapt good practice to the institutions and resources they work with.
Middle East
In the Middle East, national development strategies and diversification plans place growing demands on climate, environment and natural resources. Participants explore how to build the capability these plans need inside public bodies and companies.
Asia
Institutions across Asia combine rapid growth with ambitious modernisation programmes. Participants from Asia can share their experience of scaling systems quickly and learn from approaches used elsewhere.
Pacific
Small island and Pacific states face particular constraints of size, distance and capacity. The programme highlights practical, proportionate approaches to climate, environment and natural resources that suit smaller institutions.
Holding the programme in Istanbul, Turkey brings participants together away from their daily pressures, so they can compare how climate, environment and natural resources is handled in different settings. The same programme can also be delivered in-house for one institution, in its own country or online, with cases taken from its current work.
Host Country Profile – Turkey
Programmes, Workshops, Exposures, Training Courses in Istanbul, Turkey by Risalat Consultants International
Studying away from their own country gives participants time to focus, a fresh view of their own institution and the chance to build a network with colleagues from other countries.
Urban Water Transmission Tunnels & Bulk Water Network Operations in Istanbul Training Deliverables
Participants receive support before, during and after the programme, so that preparation, learning and follow-up form one continuous experience.
Before the Programme
- Participant Pre-Assessment
- Urban Water Transmission Tunnels & Bulk Water Network Operations in Istanbul Readiness Assessment
- Urban Water Transmission Tunnels & Bulk Water Network Operations in Istanbul Resource Pack
- Preparatory Reading Materials
- Complimentary Visa Support & Advisory
During the Programme
- Airport Pickup & Welcome Assistance
- Accommodation with Breakfast
- Welcome Networking Dinner
- Risalat Training Kit (Bag, Bottle, Mug, T-Shirt, Cap, Passport Cover, Pens, Notebook, Magnet & Keychain)
- Comprehensive Urban Water Transmission Tunnels & Bulk Water Network Operations in Istanbul Training Manual
- Climate Risk Screening Checklist
- Options Appraisal Template
- Concept Note Template
- Results Measurement Template
- Practical Workshops & Simulations
- Group Discussions & Peer Learning
- Daily Lunch and Refreshments
- Full Access to Training Venue Facilities
- Mini Pad / Tablet with Digital Learning Materials
- Field Visit (where applicable)
- Entertaining City Tour
After the Programme
- Certificate of Completion
- Risalat Programme Participation Recognition Award
- Post-Training Reference Materials
- Funding Readiness Checklist
- Monitoring and Reporting Template
- Post-Training Support & Follow-Up Guidance
- Programme Report
Institutions can also request a tailored in-house version of this programme, delivered at their premises or online. Request a proposal.
Common Challenges in Urban Water Transmission Tunnels & Bulk Water Network Operations in Istanbul, And How This Training Helps
How can institutions assess climate and environmental risks to their services and assets?
The programme addresses this directly on the first day (Tunnel Hydraulics and Bulk Water Conveyance Design), where participants practise the methods involved and adapt them to their own institution, then build it into their action plan.
How can institutions design projects that meet climate and environmental goals?
The programme addresses this directly on the second day (Telemetry, Flow Monitoring, and Bulk Water SCADA Systems), where participants practise the methods involved and adapt them to their own institution, then build it into their action plan.
How can institutions prepare proposals that financiers can approve?
The programme addresses this directly on the third day (Water Quality Supervision and Transmission Integrity), where participants practise the methods involved and adapt them to their own institution, then build it into their action plan.
How can institutions measure and report results credibly?
The programme addresses this directly on the fourth day (Structural Condition Assessment and Asset Inspection Protocols), where participants practise the methods involved and adapt them to their own institution, then build it into their action plan.
How can institutions work with communities and partners across sectors?
The programme addresses this directly on the fifth day (Preventive Maintenance Planning and Operational Contingencies), where participants practise the methods involved and adapt them to their own institution, then build it into their action plan.
Frequently Asked Questions
When and where does the Urban Water Transmission Tunnels & Bulk Water Network Operations in Istanbul programme take place?
It runs from 18 Jan 2027 to 22 Jan 2027, in Istanbul, Turkey. The registration deadline is shown at the top of this page.
Who should attend?
The programme is designed for technical directors and utility executives from Beirut Mount Lebanon Water Establishment, project Implementation Unit (PIU) engineers managing bulk water investments, water network operations managers overseeing municipal transmission mains, hydraulic engineers and network modellers from municipal water establishments, and others who want practical skills in climate, environment and natural resources.
Will I receive a certificate?
Yes. Participants who complete the programme receive a Certificate of Completion from Risalat Consultants International.
Can this programme be delivered for our institution only?
Yes. We can deliver a tailored in-house version at your premises, in another city or online, built around your own cases. Use the proposal request on this page.
Do I need prior experience in climate, environment and natural resources?
No specialist background is required beyond experience in a related role. A short pre-assessment helps the facilitators adapt the sessions to the group.
Training courses in IstanbulEnergy and Water training courses
Why Istanbul for this programme
Istanbul sits between Europe and Asia, with direct flights from most capitals and easy visas for many delegations.
The Urban Water Transmission Tunnels & Bulk Water Network Operations in Istanbul programme in January 2027 brings together officials and professionals from across the Europe and Asia region and beyond. Sessions combine short inputs, case studies and group work on participants' own files, and the city's institutions can be added as a study visit on request.
Getting there: Istanbul Airport (IST).
Check whether you need a visa with the free Visa Checker, and ask for an invitation letter once you are registered.
Other programmes in Istanbul
- Integrated Financial Management Information Systems (IFMIS) Audit and PFM in Istanbul
- Shock-Responsive Safety Net Registry Design and Benefit Management in Istanbul
- Education Data Systems and School Grants Administration in Istanbul
- Fiduciary Controls and Fund Flow Tracking for Transition Grants in Istanbul
- Public Sector Institutional Transition and Reintegration Strategy in Istanbul
More training courses in Türkiye · All programmes in Europe · Full training calendar
Plan this programme in a roadmap: why it matters, why to approve it, the dates to plan and the career it builds.



